Nationwide Boiler Inc

Rentals Sales Service
24/7 Emergency Assistance
Emergency Preparedness Guide

Boiler Blog | Nationwide Boiler

Posted on

With demand for boilers on the rise, lead times for new equipment are getting lengthy. At Nationwide Boiler we are committed to having the equipment you need when you need it most, which is why we are continuously acquiring a variety of new and good-quality used boilers to add to our stock inventory for rental or purchase. 

The following used equipment will be reconditioned and added to our stock inventory:

  • 75,000 lb/hr, 350 psi design, gas or #2 oil fired Nebraska watertube boiler, built in 1995
  • 75,000 lb/hr, 350 psi design, gas or #2 oil fired Nebraska watertube boiler, built in 1992
  • 70,000 lb/hr, 300 psi design, gas or #2 oil fired Nebraska watertube boiler, built in 1996
  • 700 HP, 150 psi design, gas fired Cleaver-Brooks firetube boiler, built in 1996

We also have the following new boilers on order, most of which will be available this fall:

  • 200,000 lb/hr, 750 psi design, 750F superheat, Babcock & Wilcox watertube boiler
  • 82,500 lb/hr, 350 psi design, gas or #2 oil fired Nebraska watertube boiler
  • 75,000 lb/hr, 750 psi design, 750F superheat, Babcock & Wilcox watertube boiler
  • 650 HP, 250 psi design, gas fired York-Shipley firetube boiler
  • 650 HP, 250 psi design, gas or #2 oil fired York-Shipley firetube boiler

For more details on these boilers and other equipment listed on our website, contact Nationwide Boiler today at 1-800-227-1966.

Posted on

Nationwide Boiler knows that renting a boiler is quite different from renting a car; much more time and preparation is involved to ensure a smooth rental.

Keeping our customers informed and well-prepared is one of our top priorities. For customers who are new to the rental process or may need a refresher, we have comprised a list of common questions and answers related to renting a boiler.

As always, if you have any questions don't hesitate to contact us, toll free at 1-800-227-1966. 

1. WHO PROVIDES INSURANCE? The Lessee agrees to provide full protection for the boiler. This value will be noted on the Lease Rental Agreement. Generally, your boiler insurance policy and general liability insurance will automatically pick up this risk.

2. WHO PAYS THE FREIGHT? This is the Lessee’s responsibility. Nationwide will make the arrangements. Lessee pays the shipping charge from the storage location to the plant site along with the return shipping charge.

3. WHO PAYS FOR LOADING AND UNLOADING? Typically applicable for skid-mounted boiler and auxiliary equipment rentals, the Lessee is responsible for these charges. Watertube rental boilers with outputs of 82,500 lbs/hr and above are accompanied by one or two extra flatbeds carrying the economizer, stub stack, FGR piping, safety valves, etc. Nationwide will arrange and invoice Lessee for loading and unloading (and crane services, as required) at the storage location. Lessee must arrange and pay for the unloading and reloading at the plant site.

4. WHAT ABOUT FUEL AND POWER? These are supplied by the Lessee. Nearly all of our rental boilers are manufactured to fire either natural gas or No. 2 oil. The standard mobile boiler room and trailer-mounted watertube boiler electrical requirement is a single-point 480V/3-phase/60 Hz connection. A 120V/1-phase control circuit transformer is included and pre-wired. Watertube boilers require a dry, clean control air supply (typ. 60 to 80 psi). See specification sheet or drawing package for exact power requirement.

5. WHO PROVIDES THE OIL PUMP FOR NO. 2 OIL FIRING? The No. 2 oil pump and automatic equipment (on boilers under 40,000 lbs/hr) are generally provided as an integral part of the boiler. Atomizing steam and atomizing air piping (for start-up) is also provided for No. 2 oil firing. Heaters for No. 6 oil firing (on select boilers) must be provided by the Lessee.

6. WHO PROVIDES NO. 2 OIL OR PROPANE TANKS? If the Lessee does not have a natural gas supply or fuel storage facility, then a local oil or LPG supplier can usually provide a temporary storage tank. A vaporizer and regulator(s) are also recommended for LPG firing. Please note a state inspection and operating permit for the tank(s) may be required (check with state boiler inspection office). Please be sure to observe local NFPA or fire code clearances when installing the tank(s).

7. WHO SUPPLIES THE MAIN GAS PRESSURE REGULATOR? A regulator is included as a part of the pre-piped and wired gas train on our mobile boiler rooms and skid-mounted firetube rental boilers. For our watertube rental boilers, a separate pre-piped single or dual-monitor regulator assembly can be provided for an additional cost if the on-site gas pressure supply cannot be regulated to 15 psi. In either case, a constant and regulated gas pressure must be supplied to the boiler by the Lessee. See the specification sheet or drawing package for exact pressure requirement.

8. WHO PROVIDES THE FD FAN? The FD fan is installed on boilers with an output of 70,000 lbs/hr or less. For watertube boilers typically exceeding this capacity, the fan is shipped loose on an additional flatbed. A crane is required to install the fan and economizer on top of the burner housing of our 75,000 lbs/hr superheat and 82,500 lbs/hr saturated steam boilers or on a foundation next to our 120,000 lbs/hr boiler.

9. WHO PROVIDES THE BOILER EXHAUST STACK & OTHER AUXILIARIES? Exhaust stacks, typically 7 ft. tall, are provided with all rentals and are bolted to the trailer deck for shipment on boilers with an output of 70,000 lbs/hr or less. Economizers, as required, are readily available for our 70,000 lbs/hr thru 200,000 lbs/hr watertube boilers and are shipped on a separate flatbed. FGR piping, CataStakTM SCR equipment, and raincaps may be also required as site conditions warrant. This equipment is also shipped on a flatbed. Loading, unloading, and installation of this additional equipment are the responsibility of the Lessee.

10. WHO PROVIDES THE HOOKUP AND DISASSEMBLY? Connection and disassembly are done by plant personnel or a local boiler shop. Trailer-mounted watertube boilers are usually supported by railroad ties spaced along the length of the trailer. We recommend only hard-piping for the interconnections. Most times, stub-outs from existing piping may be blank-flanged or capped for ease of future rental tie-ins.

11. WHO PROVIDES THE PERMITS? Any permits (except for select boilers already having a pre-approved South Coast Air Quality Management District (i.e. Los Angeles, CA area) permit) or inspections are the Lessee’s responsibility.

12. WHO PROVIDES THE START-UP? Nationwide provides this service at an additional charge. See our Service Terms and Conditions sheet for details.

13. WHAT ABOUT BOILER AND FEEDWATER TREATMENT? Boiler and feedwater treatment regularly used at the jobsite with existing plant equipment may be suitable for the rental boiler. Mobile boiler rooms are provided with water softeners and chemical treatment equipment. Salt for the brine tank, chemicals, and chemical treatment are by the Lessee. We recommend adherence to ASME recommended water quality limits. A consultation with a water treatment specialist, who most times is already on-site caring for existing equipment, is recommended. Removal of any scale that might develop during operation is the responsibility of the Lessee.

14. HOW SHOULD THE BOILER BE OPERATED? The boiler should be operated by competent engineers in accordance with the Lessor’s Instruction & Operation Manual. Any occurrence or damage other than normal wear and tear is the responsibility of the Lessee. Generally, on-site boiler operators can handle our automatic boilers along with their existing duties. Boiler bottom and control blowdown is recommended at least once per shift.

15. HOW SHOULD THE BOILER BE PREPARED FOR SHIPMENT? The boiler should be fully-drained, opened, washed-out, and inspected by the boiler inspector and plant personnel. In our mobile boiler rooms, the feed system, water softener, and chemical treatment equipment should also be fully-drained prior to shipment. The Inspection Report found in the front of the Instruction & Operation Manual should be completed and forwarded to Nationwide Boiler Inc. at the completion of the rental project. This work is the responsibility of the Lessee.

16. WHO PROVIDES BOILER FREEZE PROTECTION? Freeze protection, as required for exposed skid-mounted equipment and watertube boilers, is the responsibility of the Lessee. Heated weather hoods built on-site are an option to typical heat tracing. Contact Nationwide Boiler for additional information about protecting equipment from freezing conditions.

Posted on

When a refiner needs equipment during a planned outage or on an emergency basis, timing is critical. Nationwide Boiler understands that supplying the right equipment at the right time is key in keeping our customers running and we are determined to stock a wide variety of rental boiler equipment ranging in sizes from 47.5 HP mobile boiler rooms to 120,000 lb/hr trailer-mounted watertube boilers.

At the beginning of March, Nationwide Boiler sent three 70,000 pph trailer-mounted rental boilers, two mobile feedwater systems, and three CataStak™ SCR Systems to a large refinery in California. This is one of nearly ten projects we have had with this facility in past years.

The original inquiry called for two boilers, feedsystems and CataStak SCR’s and the equipment was required fairly quickly for the rental project. Nationwide Boiler expedited shipment for these boilers to arrive on time for the customer. After shipment, the third boiler and CataStak SCR were requested, and we were able to quickly commission a boiler that had just returned from another rental in order to fulfill the customer’s request. All equipment is now onsite and in operation, and scheduled to remain at the facility through April.

Nationwide Boiler’s rapid response time and superior customer service helped secure the rental for this project. These are just two reasons that Nationwide’s core customer base comes from repeat, satisfied customers.

Read our latest press release for more about how we recently delivered on a fast-track basis to a major CA refinery, and call us today to learn for yourself and become one of Nationwide Boiler’s many satisfied customers! 1-800-227-1966

Posted on

Nationwide Boiler is a proud partner and stocking distributor for Babcock & Wilcox (B&W), a boiler manufacturing company that has been around for over a century. The founders of B&W have compiled a list of requirements for the perfect steam boiler, and Nationwide Boiler would like to share them with you:

  1. Proper workmanship and simple construction, using materials which experience has shown to be best, thus avoiding the necessity of early repairs.

  2. A mud drum to receive all impurities deposited from the water, and so placed as to be removed from the action of the fire.

  3. A steam and water capacity sufficient to prevent any fluctuation in steam pressure or water level.

  4. A water surface for the disengagement of the steam from the water, of sufficient extent to prevent foaming.

  5. A constant and thorough circulation of water throughout the boiler, so as to maintain all parts at the same temperature.

  6. The water space divided into sections so arranged that, should any section fail, no general explosion can occur and the destructive effects will be confined to the escape of the contents. Large and free passages between the different sections to equalize the water line and pressure in all.

  7. A great excess of strength over any legitimate strain, the boiler being so constructed as to be free from strains due to unequal expansion, and, if possible, to avoid joints exposed to the direct action of the fire.

  8. A combustion chamber so arranged that the combustion of the gases started in the furnace may be completed before the gases escape to the chimney.

  9. The heating surface as nearly as possible at right angles to the currents of heated gases, so as to break up the currents and extract the entire available heat from the gases.

  10. All parts readily accessible for cleaning and repairs. This is a point of the greatest importance as regards to safety and economy.

  11. Proportioned for the work to be done, and capable of working to its full rated capacity with the highest economy.

  12. Equipped with the very best gauges, safety valves, and other fixtures.

Source: List prepared by George H. Babcock & Stephen Wilcox in 1875

Follow Us On Social Media Twitter Facebook Google Plus Linked In Boiler Blog Watch Us on YouTube